Pressure Vessel Standards - manufacturer, factory, supplier from China

Fully welded plate heat exchanger, the entire plate bundle is made of special stainless steel, welded by argon arc welding, without any non-metallic materials for sealing, with high temperature...

Shell assembly welding requirements 1、In the cylinder fabric, the length of the first cylinder section should be considered to be not less than 300mm. 2、When assembling, the cross welding seam should...

Test medium 1. Air pressure test medium should be dry, clean air, nitrogen or other inert gas. 2. The pressure vessel with flammable media in use must be thoroughly steam cleaned and replaced,...

General rules 1.The completed vessel should be pressure tested (hydraulic test or gas tightness test) or adds the gas tightness test according to the drawings. 2.The pressure test must use two...