Titanium Weld Neck Flange

Titanium Weld Neck Flange

Brief Introduction:

Titanium is also one of Wel Neck Flange, which is made of titanium material. Titanium Flange is a kind of part made of non-ferrous metal titanium or titanium alloy that connects the pipe to the pipe, and is connected to the pipe end. There are holes on the titanium flange, and the bolts connect the two flanges tightly. The flanges are sealed with gaskets. Flanged fittings refer to fittings with flanges (flanges or pans). It can be cast (picture not available), threaded or welded. Flange connection (flange, joint) consists of a pair of flanges, a gasket and several bolts and nuts. The gasket is placed between the sealing surfaces of the two flanges. After the nut is tightened, the specific pressure on the surface of the gasket will deform when it reaches a certain value, and fill the unevenness on the sealing surface to make the connection tight and leak-proof.

Titanium alloys refer to alloys made of titanium and other metals, which are important structural metals. The performance of titanium alloy is also good. For example, the strength of this kind of metal material is high, and its strength far exceeds that of other metal structural materials. Titanium alloy is light in weight and its density is about 60% of that of steel. Titanium alloy also has the advantages of good corrosion resistance, good heat resistance, and good mechanical properties, and is widely used in heat exchangers in chemical and other fields.

Advantage of Our Company:

Standard:

GB/T9119-2000

Ministry of Chemical Industry Standard:
HG/T20592-2009 HG/T20615-2009

American Standard:
ANSI B16.5

Material: Grade:

TA1, TA2, TA3, TA7, TA9, TA10, TC4, TC4ELI, TC6, TC9, TC10, TC11

American sign number:
GR1, GR2, GR3, GR5, GR7, GR12

Delivery state:
hot working state (R) cold working state (Y) annealing state (M) solid solution state (ST packaging: packing or wooden box packaging)

Surface Treatment:
Polished or Turned

Surface quality:
high precision, good finish, no oxide layer, pits, no cracks, folds, folds, scars, delaminations, hair lines and other defects.

Surface finish:
clean, dust-free, better acid-resistant service life.

Physical properties:
better elongation and strength properties.

Test:
physical property test, hardness test, chemical composition test.

We sincerely wait for your inquiry of our heat exchanger, flange, or any other product. 

Product Categories : Heat Exchanger Parts > Flange